Mermaid Ash Emerald Textured Dread Extensions
Mermaid — sea-witch textured dread extensions in pure platinum ash blended with vivid emerald-teal, ridged from root to tip with raw straight free-falling ends. Hand-crocheted handmade synthetic dreads with silver metal beads, silver dread rings, and blue + white thread X-pattern wraps. DE only, 50 cm, boiling-water-set for permanent bumpy surface — DaddyDread studio.
Format: DE (Double Ended) only
1 base, 2 ends. Double volume per single installation point.
Description
Mermaid is a 50 cm DE textured dread extensions set — bumpy handmade dreadlock extensions in pure platinum ash blended with vivid emerald, ridged from root to tip and finished with a raw finish of straight free-falling ends. Imagine a sea-witch install: emerald and silver-ash strands twisting together like seaweed at low tide, silver hardware catching the light, raw straight tips brushing your shoulders. The organic look (an aesthetic effect — the fiber is fully synthetic) is built into every strand from production day one.
Mermaid ash emerald boho textured dreadlocks with bumpy ridged texture
These hand-crocheted textured dreadlock extensions were built around one styling target: the mermaid / sea-witch / nordic-fantasy aesthetic. The cool ash and saturated emerald palette reads as ocean-and-shore — quiet platinum with bursts of teal lagoon. These ash textured dreads deliver the natural-aged dreads aesthetic in a fully cool palette. Wear it everyday or save it for festivals and editorial shoots — the bumpy surface gives you the lived-in mature-dread look without the months of natural aging. Browse the full textured dread collection for matching tones if you want to expand the install.
The colour story splits clean per 10 DE pieces: 5 strands in pure platinum ash blonde, 2 in vivid emerald-teal, 2 in ash-and-emerald twisted strands where both fibers crochet together, and 1 flat 3-strand braid in either ash or emerald. The ash zone reads as cool silver-platinum with no warm undertones; the emerald sits between Tiffany blue and mermaid green, fully saturated. Ash blonde textured dreads read as a clean cool base — the emerald accents push this set into siren / fantasy territory.
Decorations stay simple and silver. Small silver metal beads sit on selected dreads — slim cylindrical accents with no engraving, slid on and held by thread wrap pressure. Silver dread rings hold the thread wraps in place at random points down the strand. The thread wraps come in two colours: light blue thin thread in a tight X-pattern around several emerald and ash strands, plus white thin thread mid-strand on others for a colder accent. The flat 3-strand braids carry no decorations of their own — they sit as the lightest, most polished elements between the ridged dreads.
Note: the large Celtic-knot brooch shown in some photos is a styling prop for the photoshoot, not part of the set.
| Strand type | Per 10 DE | Notes |
|---|---|---|
| Pure platinum ash | 5 | Cool silver-platinum, no warm undertones |
| Vivid emerald-teal | 2 | Tiffany-blue to mermaid-green saturated |
| Ash + emerald twisted | 2 | Both fibers crocheted together |
| Flat 3-strand braid | 1 | Ash or emerald, no decoration |
From 13+ years of finishing textured palettes in our studio, we have settled on one rule: every backcombed strand goes through the boiling water treatment, no shortcuts, no skipped batches — that is what locks the ridges for the life of the set.
Format-wise, Mermaid ships as DE only at 50 cm length. Double ended textured dreads fold around a small natural-hair braid in a U-bend, so both ends fall freely with the raw straight tips visible from any angle. A full head needs 40-50 DE pieces; a partial install for accent stripes or front-only siren styling runs 15-25 pieces. The braid-in method distributes weight across each anchor point and stays comfortable across the wear cycle. New to double-ended construction? See how single and double ended dreads differ.
Built from premium heat-resistant Henlon and Kanekalon fiber. The textured finish is locked in with boiling water treatment during production — it will not flatten or lose definition over time. Backcombing opens the workflow: backcomb the kanekalon for volume, crochet each dread with a 0.4mm precision crochet hook (range 0.4-0.6 mm depending on dread thickness), boiling-water-set the finished strand for permanent ridged texture. Hook by hook, ridge by ridge — that is how every Mermaid set leaves our studio across 1.5-2 days of focused hand work. Pure crochet braiding, no wrapping, no machines — and exactly the same hand-crocheted technique that powers our entire crochet dreadlock extensions line.
The routine is simple: wash once a week with diluted shampoo (1:5 ratio, scalp only), air-dry fully, and never use a hot blow dryer or visit a sauna — high heat permanently deforms synthetic textured dreads. Do not comb or brush the textured dreads — gently separate any tangled tips with your fingers to preserve the bumpy surface. Skip conditioner altogether — synthetic fiber does not absorb it and the coating softens the ridges. At night, gather them in a loose braid or sleep bonnet. Full care guides cover every detail.
Mixing Mermaid with kanekalon textured dreads and double ended textured dreads
The Mermaid palette layers cleanly with several DaddyDread synthetic dreadlock extensions: solid platinum ash sets for a fully icy install, pure emerald sets to deepen the green presence, or curly natural-hair pieces in mushroom-blonde for boho softness. The ridged texture sits cleanly above curly natural hair underneath — a clean fit for bohemian dreadlocks styling. The textured vs smooth dreadlocks distinction comes down to the heat finishing step: boiling water for ridges, steam for flat. To learn how textured dreads are made in our 3-step process guide, read our deep-dive at types of dreadlocks texture in our studio.
This is a fully reusable set: undo the small natural-hair braids at cycle end, store flat without any compression, reinstall after re-braiding your hair. One install holds for 1.5-2 months. Removing is clean — no breakage, no damage to your natural hair underneath. Reinstall the same set multiple times. The boiling-water-set finish means they look like day one every reinstall — the silver metal beads and small silver rings can be re-threaded onto fresh strands later if you ever retire the original fiber.
Note on colour: synthetic fiber reads cooler or warmer depending on screen and lighting. We shoot in diffused daylight for the closest match. Stocked variants ship from the USA in 2–4 business days (Canada up to 10 business days, Europe 2–3 weeks); made-to-order variants are built like our natural dreads — production runs 10–14 days, then the parcel ships in 2–3 weeks for the USA, 3–4 weeks for Canada, or 3–4 weeks for Europe (total roughly 4–5 weeks for the USA, 5–6 weeks for Canada or Europe, from your order). Decorations are customizable on request — thread colour, charm style, and bead choice can be swapped at production stage.
Mermaid is part of the handmade synthetic dreads line at DaddyDread, with 5,000+ sets shipped worldwide across 13+ years to clients in the USA, Europe, Canada, and Australia.
Buy textured dread extensions: see Mermaid on real installs
See this set on real clients — follow @daddy__dread on Instagram for install photos in natural light. Ready? Buy textured dread extensions in the Mermaid palette direct from our studio — artisan-made dreadlock extensions, ruler-measured, ready to ship. Natural-looking synthetic dreads for siren, sea-witch, and nordic-fantasy looks. These organic-look dread extensions deliver the raw synthetic dreadlocks aesthetic with the instant mature look built in from day one of wear.
Frequently Asked Questions
How long do textured synthetic dreadlocks last?
Standard wear is six to eight weeks per install. The bumpy surface does not flatten — it is locked into the kanekalon fiber by the boiling water treatment during production. Remove carefully, air dry, store flat, reinstall. Same dreads, same texture, every time.
What is the difference between textured and smooth synthetic dreads?
Textured synthetic dreads carry a continuous bumpy surface from root to tip. Smooth dreads are steam-flattened for a polished look. DaddyDread makes both types by hand using crochet braiding — same core technique, opposite finishing steps. Steam flattens, boiling water locks ridges.
Why do you use boiling water for textured dreads?
Boiling water locks the ridged surface permanently into the synthetic fiber after crocheting — the opposite effect from steam, which flattens. The boiling water bath sets the bumpy memory into each strand so the texture survives every wash, sleep, and install cycle without re-defining. It is the structural finishing step that makes textured a distinct category from smooth.
Can I add more silver beads or extra wraps after install?
Yes. The silver metal beads and silver dread rings can be slid onto any dread with free space, and additional thread wraps in any colour can be tied on by hand. No special tools needed — extra silver hardware or thread can be added between install cycles to refresh the look.
Are these textured dreads suitable for fine or thin natural hair?
Yes, with the braid-in method recommended in DE format. The U-bend folds each Mermaid strand around a small natural-hair braid, distributing weight across both strand ends rather than pulling on a single attachment point. For fine or thin hair, anchoring across many small braids rather than a few large ones is the safer approach — keeps weight per anchor point lower.
Customer Reviews
¡Sirena total! El verde esmeralda mezclado con ceniza es ÚNICO, en Barcelona la gente me para por la calle. Los recibí en unas 2 semanas y media y la calidad es brutal. Voy a pedir otro set en otro color seguro, mi pareja me dice que ya se me está yendo de las manos jaja








