Dark Mode
Language
English
Synthetic Dreadlocks

Bloodmoon Black Red Textured Dread Extensions

From $60.00

Bloodmoon — black-red gothic textured dread extensions, three discrete colors mixed strand by strand: pure black, pure red, black-red marled. Henlon and Kanekalon synthetic fiber, 0.8–1 cm thickness per dread. Boiling-water-set ridges, silver feather and crescent moon charms, white and red thread X-wraps. DE, 50 cm. Need a different length, color or piece count? Request a custom set →

Format: DE (Double Ended) only

DE — Double Ended dreadlock format
DE — Double Ended

1 base, 2 ends. Double volume per single installation point.

From $60.00
Flat rate shipping — $20.00
Shipping & Returns — View policy
How many dreads do I need? Calculate now

Description

Bloodmoon is gothic textured dread extensions in a 50 cm DE set — three discrete colors woven into a witchy black-red palette: solid jet black, pure crimson red, and marled black-red strands where both fibers twist within one dread. No ombré, no fade.

Each set ships boiling-water-set with silver feather and crescent moon charms, white and red thread X-pattern wraps, and a polished thin braid woven through every ten DE pieces. Across 13+ years of studio work and 5,000+ sets shipped worldwide, textured ranks among DaddyDread’s fastest-growing categories — and Bloodmoon brings that ridged-surface pedigree into a goth-bohemian colorway.

Three colors, no ombré — Bloodmoon’s black-red textured dreadlock extensions story

The colour story stays locked strand by strand: black dreads are fully black root to tip, red dreads fully red, marled dreads carry both colours twisted into one strand. High-contrast crimson against jet — pair with dark velvet, lace, or silver hardware for the witchy boho dreads read.

Strand type Build Visual role
Pure black Solid jet, ridged root to tip Anchor base, blends with dark hair
Pure red Solid crimson, full saturation Brightest accent stripe in the mix
Black-red marled Both fibers twisted into one strand Wine-tone bridge between black and red
Format ratio 9 dreads + 1 thin braid per 10 DE Polished braid accent woven through

Synthetic Henlon and Kanekalon color is locked at the fiber level — red stays red, black stays black, no oxidation. These solid black textured dreads within the mix anchor the set against any underlying hair shade, while the crimson and marled strands carry the visual signal.

Each Bloodmoon set ships with these on-strand decorations:

Slim silver metal beads
Narrow plain cylinders, slid onto selected dreads and held by adjacent thread wraps.
Silver feather charm pendants
Small feather-shaped silver pendants on a few feature strands, attached at random intervals.
Silver crescent moon charms
Witchy crescent pendants — the on-strand tie-in to the Bloodmoon name.
White and red thread X-pattern wraps
Thin thread crisscross around mid-strand sections, white and red alternating across the set.
Flat 3-strand thin braid
One polished braid woven into every 10-DE group (9 dreads + 1 braid) as the smooth counterpoint to the ridged dreads.

Note: brass hoop earrings, black-bead rosary necklace, black tassel rope, and the B&W photo print visible in some images are styling props for the photoshoot — not part of the Bloodmoon set.

Boiling water sealed dread extensions: how Bloodmoon ridges hold for years

High-grade Henlon and Kanekalon fiber with a boiling-water-set bumpy surface. Lightweight on the head, holds its organic ridged texture across months of wear without any product.

The textured finish is structural rather than styled — once the ridges are locked into the synthetic fiber by heat, they cannot flatten, fuzz, or wash out. Same fiber-physics principle as our entire synthetic dreadlock extensions line, with boiling water as the textured-specific lock step.

Three steps, one set, every time — the Bloodmoon build

Each set is built through three manual stages. First, an artisan backcombs the kanekalon fiber by hand to create raw volume — the chaotic base structure the bumpy surface needs. Second, the strand is crocheted with fine precision hooks (0.4-0.6 mm) — we use our signature 0.4mm precision crochet hook on the thinnest dreads.

Third, each dread is boiling-water-set for a permanent bumpy surface. Handmade by our master artisans across 1.5-2 days, hand-crocheted strand by strand — three steps, one set, every time.

Quality control before a Bloodmoon set leaves the studio

Thickness is checked with a ruler at 0.8-1 cm on every dread. Length verified at 50 cm. Texture consistency inspected across the full set. Final sign-off comes from a specialist who has been making dreads for 13+ years, with the 5,000+ sets archive backing every QC call. The same hand-crocheted technique runs across our crochet dreadlock extensions line — only the final heat step differs.

Care for kanekalon textured dreads — wash, store, sleep

Wash once a week max — dilute shampoo 1:5, scalp only, air-dry afterward. Do not comb or brush the textured dreads — gently separate any tangled tips with your fingers to preserve the bumpy surface. Skip conditioner: it softens the ridges. Avoid saunas and hot blow dryers; the ridged finish is permanent but not heat-proof. At night, gather into a loose braid or bonnet. Detailed care guides live at the DaddyDread Academy.

Double ended textured dreads — Bloodmoon DE format and full-head fit

Bloodmoon ships in Double Ended (DE) format only. Each dread folds around a small natural-hair braid in a U-bend, with both ends falling freely and the raw straight tips visible at the bottom. Full head install runs 40-50 pieces; partial accent installs use 20-30 DE pieces. The braid-in method distributes weight across many small anchor points — the safer install approach for fine hair. Format breakdown lives in our guide to SE vs DE formats.

Bloodmoon mixes cleanly with other DaddyDread handmade dreadlock extensions. Pair with a solid black textured dreads SE accent from our deep-dive on dreadlock texture types, or layer a smooth black set underneath for a textured vs smooth dreadlocks contrast — lived-in body with polished ends.

Run Bloodmoon solo for a full goth boho dreads read with that raw synthetic dreadlocks aesthetic and organic aesthetic the bumpy surface delivers.

Fully reusable: one install holds for 1.5-2 months. Undo the small braids at cycle end, store flat, reinstall after re-braiding. Removal is clean — no breakage. The boiling-water-set surface means Bloodmoon looks like day one every reinstall. In-stock sets ship from the USA in 2–4 business days, reach Canada in up to 10 business days, and Europe in 2–3 weeks. If a set is out of stock we make it to order like our natural dreads — 10–14 days in the studio, then dispatch takes 2–3 weeks for the USA, 3–4 weeks for Canada, or 3–4 weeks for Europe, landing about 4–5 weeks (USA) or 5–6 weeks (Canada / Europe) end-to-end. Decorations swappable on request — thread color, charm style, bead choice. Photos shot in natural daylight; screen calibration may shift the red.

Browse installation tutorials and care walkthroughs at the DaddyDread Academy. Ready? Buy textured dread extensions in the Bloodmoon palette from our studio — artisan-made, ruler-measured. Natural-looking synthetic dreads with instant mature look and raw finish from day one. Bloodmoon captures the organic dread extensions look on a fully synthetic base.

Frequently Asked Questions

How long do textured synthetic dreadlocks last?

One install holds for 1.5-2 months. The ridged finish is permanent — locked into the kanekalon fiber by the boiling water treatment during production. No re-setting, no boiling-water refresh, no product needed between cycles. A well-maintained Bloodmoon set stays usable across many cycles and years of wear.

What is the difference between textured and smooth synthetic dreads?

Surface, mainly: textured dreads read bumpy and organic; smooth dreads read flat and uniform. Both styles use the same crochet braiding technique. Bloodmoon and other textured sets get a boiling water treatment that locks ridges permanently — smooth sets get a steam treatment that flattens the surface.

Why do you use boiling water for textured dreads?

Boiling water is step three of the build. After backcombing and crocheting, the kanekalon fiber goes into boiling water, which permanently sets the ridged bumpy surface into the synthetic structure. Steam (used on smooth dreads) flattens — boiling water locks ridges. Same fiber, opposite outcome, depending on the heat method.

Do textured dreads look like natural aged locs?

Yes — that is the entire point of the textured category. Bloodmoon delivers a mature loc look from day one, with the same kind of bumpy ridged surface that natural locs develop after months or years of organic aging. Visually lived-in immediately, while the underlying fiber stays fully synthetic.

What colors of textured dread extensions work best on dark hair?

Dark hair pairs cleanly with any textured tone, but the strongest visual match is a set with a black anchor — Bloodmoon does this naturally. Solid black strands sit cleanly against underlying braids, while red strands and black-red marled pieces create stand-out accents without tonal clash.

Customer Reviews

5 (1 review)
Verified

Bloodmoon est le nom parfait pour cette palette. Le rouge profond dans le noir donne un côté dramatique sans être kitsch. Je suis archéologue (oui je sais, métier random) et j'ai eu énormément de retours positifs sur le terrain ahah. Bon par contre faut prévoir une casquette quand il fait très chaud, sinon c'est un peu lourd.

Welcome

Sign in or create an account

or

By continuing, you agree to our Privacy Policy